Phosphorus

Phosphorus 30.973761(2) +3 +5 0 -3   P 15 1s22s22p63s23p3 15,3,p [ ? ] Non-Metal: Properties: allotropic Compounds: Oxides, oxyacids, halides Uses: Vital to life; fertilizers; pesticides; acids; drying agents Hazard: flammable, toxic

Phosphorus is a chemical element with the atomic number Z = 15. Unlike other elements in group VA of the periodic table, phosphorus is never found as a pure element in nature, but only in combination with other elements.

It is present in all living organisms in the form of organophosphates and as calcium phosphates such as hydroxyapatite (Ca₁₀(PO₄)₆(OH)₂) and fluoroapatite (Ca₁₀(PO₄)₆F₂), substances found in teeth and bones. Many cell signaling cascades in living organisms operate by a series of phosphorylation events in which a phosphate group (PO₄)²⁻ is either added to a protein by a kinase or removed from a protein by a phosphorylase.

Both red phosphorus and tetraphosphorus trisulfide are used in common matches because they are easily ignited by heat. However, the agricultural industry is the largest user of phosphorus in the form of fertilizers.

The radioactive isotope ³²P is used to radiolabel compounds for scientific studies. Phosphorus and arsenic share many chemical properties. Template:TOC-left

Production of elemental phosphorus

Calcium phosphate (phosphate rock), mostly mined in Florida and North Africa, can be heated to 1200-1500 Celsius with sand, which is mostly SiO₂, and coke (impure carbon) to produce vaporized tetraphosphorus, P₄, (mp. 44.2 C) which is subsequently condensed into a white power under water to prevent oxidation. Even under water, white phosphorus is slowly converted to the more stable red phosphorus allotrope (mp. 597C). Both the white and red allotropes of phosphorus are insoluble in water.

Fertilizers

Due to the essential nature of phosphorus to living organisms, the low solubility of natural phosphorus-containing compounds, and the slow natural cycle of phosphorous, the agricultural industry is heavily reliant on fertilizers which contain phosphate, mostly in the form of superphosphate of lime. Superphosphate of lime is a mixture of two phosphate salts, calcium dihydrogen phosphate Ca(H₂PO₄)₂ and calcium sulfate dihydrate CaSO₄•2H₂O produced by the reaction of sulfuric acid and water with calcium phosphate.

Allotropes of phosphorus

(CC) Image: David E. Volk
Structure of white phosphorus.

Both phosphorus and arsenic have many allotropes, but only the white and red forms predominate.

• White phosphorus and yellow arsenic both have four atoms arranged in a tetrahedral structure in which each atom is bound to the other three atoms by a single bond. This form of the elements are the least stable, most reactive, more volatile, less [[Density {chemistry)|dense]], and more toxic than the other allotropes. The toxicity of white phosphorus led to its discontinued use in matches. The crystal melts at 44 ⁰C and has a density of 1.83 kg/L. The liquid boils at 280 ⁰C.
• Red phosphorus: here one of the bonds in P₄ described above has been broken, and one additional bond is formed with a neighboring tetrahedron.
• Black phosphorus is made of even larger aggregates and is the least reactive allotrope. It is also known as β-metallic phosphorus and has a structure somewhat resembling that of graphite.
• The diphosphorus allotrope, P₂, is stable only at high temperatures. The dimeric unit contains a triple bond and is analogous to N₂.
• Violet phosphorus (also known as Hittorf's or α-metallic phosphorus) is obtained by crystallization from molten lead. Its density (2.34 kg/L) is higher than that of white phosphorus.

Chemical bonding

Valence states of phosphorus, diagram after Ref.

Because phosphorus is just below nitrogen in the periodic table, the two elements share many of their bonding characteristics. For instance, phosphine, PH₃, is an analogue of ammonia, NH₃. Phosphorus, like nitrogen, is trivalent in this molecule,

This is the pre-quantum mechanical Lewis structure, which although somewhat of a simplification from a quantum chemical point of view, illustrates some of the distinguishing characteristics. The unpaired electrons in the three 3p orbitals bind with those in the hydrogen 1s orbitals to form electron pairs of opposite spin. The electron pair in the phosphorus 3s orbital shows up as a lone pair in the Lewis structure.

The phosphorus cation is very similar to the nitrogen cation. In the same way that nitrogen forms the tetravalent ammonium ion, phosphorus can form the tetravalent phosphonium ion, and form salts such as phosphonium iodide [PH₄]⁺[I⁻].

Like other elements in the third or lower rows of the periodic table, phosphorus atoms can expand their valence to make penta- and hexavalent compounds. The phosphorus chloride molecule is an example. When the phosphorus ligands are not identical, the more electronegative ligands are located in the apical positions and the least electronegative ligands are located in the axial positons.

With strongly electronegative ions, in particular fluorine, hexavalency as in PF₆⁻ occurs as well. This octahedral ion is isoelectronic with SF₆. In the bonding the six octahedral sp³d² hybrid atomic orbitals play an important role.

Before extensive computer calculations were feasible, it was generally assumed that the nearby d orbitals in the n = 3 shell were the obvious cause of the difference in binding between nitrogen and phosphorus. However, in the early eighties the German theoretical chemist Werner Kutzelnigg found from an analysis of computer calculations that the difference in binding is more likely due to differences in character between the valence 2p and valence 3p orbitals of nitrogen and phosphorus, respectively. The 2s and 2p orbitals of first row atoms are localized in roughly the same region of space, while the 3p orbitals of phosphorus are much more extended in space. The violation of the octet rule observed in compounds of phosphorus is then due to the size of the P-atom and the corresponding reduction of steric hindrance between its ligands. In modern theoretical chemistry, Kutzelnigg's analysis is generally accepted.

Phosphine, diphosphine and phosphonium salts

Phosphine (PH₃) and arsine (AsH₃) are structural analogs with ammonia (NH₃) and form pyramidal structures with the phosphorus or arsenic atom in the center bound to three hydrogen atoms and one lone electron pair. Both are colorless, ill-smelling, toxic compounds. Phosphine is produced in a manner similar to the production of ammonia. Hydrolysis of calcium phosphide, Ca₃P₂, or calcium nitride, Ca₃N₂ produce phosphine or ammonia, respectively. Unlike ammonia, phosphine is unstable and it reacts instantly with air giving off phosphoric acid clouds. Arsenic is even less stable. Although phosphine is less basic than ammonia, it can form some phosphonium salts (like PH₄I), analogs of ammonium salts, but these salts immediately decompose in water and do not yield phosphonium (PH₄⁺) ions. Diphosphine (P₂H₄ or H₂P-PH₂) is an analog of hydrazine (N₂H₄) that is a colorless liquid which spontaneously ignites in air and can disproportionate into phosphine and complex hydrides.

Phosphorus halides

The trihalides PF₃, PCl₃, PBr₃ and PI₃ and the pentahalides PF₅, PCl₅ and PBr₅ are all known and mixed halides can also be formed. The trihalides can be formed simply by mixing the appropriate stoichiometric amounts of phosphorus and a halide. For safety reasons, however, PF₃ is typically made by reacting PCl₃ with AsF₅ and fractional distillation because the direct reaction of phosphorus with fluorine can be explosive. The pentahalides, PX₅, are synthesized by reacting excess halide with either elemental phosphorus or with the corresponding trihalide. Mixed phosphorus halides are unstable and decompose to form simple halides. Thus 5PF₃Br₂ decomposes into 3PF₅ and 2PBr₅.

Phosphorus oxides (acid anhydrides)

Phosphorus(III) oxide, P₄O₆ (also called tetraphosphorus hexoxide) and phosphorus(IV) oxide, P₄O₁₀ (or tetraphosphorus decoxide) are acid anhydrides of phosphorus oxyacids and hence readily react with water. P₄O₁₀ is a particularly good dehydrating agent that can even remove water from nitric acid, HNO₃. The structure of P₄O₆ is like that of P₄ with an oxygen atom inserted between each of the P-P bonds. The structure of P₄O₁₀ is like that of P₄O₆ with the addition of one oxygen bond to each phosphorus atom via a double bond and protruding away from the tetrahedral structure.

Phosphorus oxyacids

Phosphorous oxyacids can have acidic protons bound to oxygen atoms and nonacidic protons which are bonded directly to the phosphorus atom. Although many oxyacids of phosphorus are formed, only six are important (see table), and three of them, hypophosphorous acid, phosphorous acid and phosphoric acid are particularly important ones.

Oxidation State	Formula	Name	Acidic Protons	Compounds
+1	H3PO2	hypophosphorous acid	1	acid, salts
+3	H3PO3	(ortho)phosphorous acid	2	acid, salts
+5	(HPO3)n	metaphosphoric acids	n	salts (n=3,4)
+5	H5P3O10	triphosphoric acid	3	salts
+5	H4P2O7	pyrophosphoric acid	4	acid, salts
+5	H3PO4	(ortho)phosphoric acid	3	acid, salts

Widely used phosphorous compounds

Phosphorous compound	Use
Ca(H2PO4)2•H2O	Baking powder & fertilizers
CaHPO4•2H2O	Animal food additive, toothpowder
H3PO4	Manufacture of phosphate fertilizers
PCl3	Manufacture of POCl3 and pesticides
POCl3	plasticizer Manufacturing
P4S10	Manufacturing of additives and pesticides
Na5P3O10	Detergents

Isotopes of phosphorus

Although twenty three isotopes of phosphorus are known (all posibilities from ²⁴P up to ⁴⁶P), only ³¹P, with spin 1/2, is stable and is therefore present at 100% abundance. The half-integer spin and high abundance of ³¹P make it useful for nuclear magnetic resonance studies of biomolecules, particularly DNA.

Two radioactive isotopes of phosphorous have half-lives which make them useful for scientific experiments. ³²P has a half-life of 14.262 days and ³³P has a half-life of 25.34 days. Biomolecules can be "tagged" with a radio isotope to allowed for the study of very dilute samples.

Biological membranes and phospholipids

(CC) Image: David E. Volk
Structure of a generic saturated phospholipid. Often n=10,12,14,16,18 and 22.

All cells must have a membrane that distinguishes it from the cell's surrounding. Biological membranes are made from a phospholipid matrix and proteins, typically in the form of a bilayer. Phospholipids are derived from glycerol, such that two of the glycerol hydroxyl (OH) protons have been replaced with fatty acids as an ester, and the third hydroxyl proton has been replaced with phosphate bonded to another alcohol.

History

Phosphorus was discovered by the Hamburg alchemist Hennig Brand in 1669. He made it out of human urine. He let urine stand for days until it gave off a terrible smell. Then he boiled it down to a paste, heated this paste to a high temperature, and led the vapors through water where he hoped they would condense to gold. Instead, he obtained a white, waxy substance that glowed in the dark. Brand had discovered phosphorus, the first element discovered since antiquity. The word phosphorus comes from the Greek (φως = light, φορέω = carry) and means light carrier. We now know that Brand produced ammonium sodium hydrogenphosphate (NH₄)NaHPO₄.

Brand at first tried to keep the method secret, but later sold the recipe for 200 thaler to somebody from Dresden, Krafft, who could now make it as well, and toured much of Europe with it, including England, where he met with Robert Boyle. The secret that it was made from urine leaked out and first Johann Kunckel (1630-1703) in Sweden (1678) and later Boyle in London (1680) also managed to make phosphorus. Boyle states that Krafft gave him no no information as to the preparation of phosphorus other than that it was derived from "somewhat that belonged to the body of man". This gave Boyle a valuable clue, however, so that he, too, managed to make phosphorus. Later he improved Brand's process by using sand in the reaction (still using urine as base material),

4NaPO₃ + 2SiO₂ + 10C → 2Na₂SiO₃ + 10CO + P₄

Robert Boyle was the first to use phosphorus to ignite sulphur-tipped wooden splints, forerunners of our modern matches, in 1680.

In 1769 Johan Gottlieb Gahn and Carl Wilhelm Scheele showed that calcium phosphate (Ca₃(PO₄)₂) is found in bones and they obtained phosphorus from bone ash. Antoine Lavoisier recognized phosphorus as an element in 1777. Bone ash was the major source of phosphorus until the 1840s. Phosphate rock, a mineral containing calcium phosphate, was first used in 1850 and following the introduction of the electric arc furnace in 1890 this became the only source of phosphorus. Phosphorus, phosphates and phosphoric acid are still obtained from phosphate rock. Phosphate rock is a major feedstock in the fertilizer industry.

Glow of phosphorus

In the dark pure white phosphorus glows, which explains the name of the element. This greenish glow greatly fascinated the discoverers of the element. The phenomenon phosphorescence has been named after it. Phosphorescence is the slow decay of a metastable electronic state to a lower state under emission of light. The decay is slow because the transition from the excited to the lower state is forbidden, usually because it requires a spin flip. Often it involves a transition from an excited spin-triplet state to a ground state that is a spin-singlet. The metastable excited state may have been populated by thermal excitations or some light source. Since phosphorescence is slow, it persists for some time after the exciting source is removed.

It is only natural to assume that the name giver exhibits the phenomenon named after it. However, this is not the case. The glow of pure phosphorus is due to another phenomenon, namely chemiluminescence. This occurs when some product molecules of a chemical reaction leave the reaction in an electronically excited state. When the transition from the excited state to the ground state is forbidden, decay of the product molecule(s) will be slow. The frequency (color) of the light emitted is proportional to the energy difference of the two electronic states involved, as Niels Bohr discovered in the early days of quantum mechanics (1913).

Robert Boyle already knew that air was required to make phosphorus glow, so in fact it has been clear since its discovery that phosphorus does not phosphorescence but chemiluminescense. However, the exact chemical reaction that caused it was not known until 1974 when it was shown that the excited molecule HPO and the dissociating excited dimer (PO)₂ are the originators of the green glow. The molecules HPO and PO are formed by the oxidization of white phosphorus in the presence of air and water.