Archive:New Draft of the Week: Difference between revisions

From Citizendium
Jump to navigation Jump to search
imported>Chunbum Park
m (→‎Add New Nominees Here: suppot plane geo)
imported>Daniel Mietchen
Line 33: Line 33:
| <!-- specialist supporters -->  
| <!-- specialist supporters -->  
| <!-- date created          --> Major rewrite on 29 March 2010
| <!-- date created          --> Major rewrite on 29 March 2010
|-
| <!-- article              --> [[Aeneid]]
| <!-- score                --> 1
| <!-- supporters            --> [[User:Daniel Mietchen|Daniel Mietchen]] 23:38, 10 April 2010 (UTC)
| <!-- specialist supporters -->
| <!-- date created          --> 28 March 2010
|-
|-
| <!-- article              -->  
| <!-- article              -->  
| <!-- score                -->  
| <!-- score                -->  
| <!-- supporters            --> <br/>'''
| <!-- supporters            -->  
| <!-- specialist supporters -->  
| <!-- specialist supporters -->  
| <!-- date created          -->  
| <!-- date created          -->  

Revision as of 17:38, 10 April 2010

The New Draft of the Week is a chance to highlight a recently created Citizendium article that has just started down the road of becoming a Citizendium masterpiece.
It is chosen each week by vote in a manner similar to that of its sister project, the Article of the Week.

Add New Nominees Here

To add a new nominee or vote for an existing nominee, click edit for this section and follow the instructions


Table of Nominees
Nominated article Vote
Score		 Supporters Specialist supporters Date created
Tall tale 3 Daniel Mietchen;
Howard C. Berkowitz;
Paul Wormer;
 9 March 2010
Plane (geometry) 3 Daniel Mietchen
; Meg Ireland; Chunbum Park; 		Major rewrite on 29 March 2010
Aeneid 1 Daniel Mietchen 23:38, 10 April 2010 (UTC) 28 March 2010

If you want to see how these nominees will look on the CZ home page (if selected as a winner), scroll down a little bit.

Recently created pages are listed on Special:NewPages. A cleaner list is available here.

Transclusion of the above nominees (to be done by an Administrator)

View Current Transcluded Nominees (after they have been transcluded by an Administrator)

The next New Draft of the Week will be the article with the most votes at 1 AM UTC on Thursday, 15 April, 2010.


Nominated article Supporters Specialist supporters Dates Score
Developing Article Steam: The vapor (or gaseous) phase of water (H2O). [e]
(PD) Photo: Gretar Ívarsson
Geothermal power plant in Iceland

Steam is the vapor (gaseous) phase of water (H2O) usually generated by the boiling of water. When the steam does not contain any liquid water, it is known as dry steam and it is completely colorless. However, when the steam contains tiny droplets of condensed liquid water, it appears to the eye as a white cloud (see the steam being vented from a geothermal power plant in the adjacent photograph).

What is very often referred to as smoke from cooling towers and other vents in industrial facilities is water vapor which has partially condensed and is mistaken to be white smoke. Water aerosols and mists, such as those created by spray cans for misting house plants or certain types of humidifiers, may also create small visible clouds of water droplets, but aerosols, mists and fogs are not steam. Liquids other than water may also form visible clouds when vaporized, but they are not clouds of steam.

Steam is manufactured in industrial processes by the boiling and vaporization of liquid water. It also occurs naturally by being vented from volcanoes, fumaroles, geysers and other geothermal sources.

Steam has a great many industrial and domestic uses. Probably the most important and by far the largest use of steam is in nuclear, fossil fuel and geothermal power plants.

Types of steam

(CC) Diagram: Milton Beychok

As shown in the adjacent diagram, there are three types of steam:

  • Wet steam: A mixture of water plus steam (liquid plus vapor) at the boiling point temperature of water at a given pressure. Quality of steam refers to the fraction or percentage of gaseous steam in a wet steam mixture.
  • Dry steam: Steam, at the given pressure, that contains no water (also referred to as saturated steam). The steam quality = 100%. At the top of steam generator units for producing saturated steam, there are moisture separators used to remove residual water droplets from outgoing steam.
  • Superheated steam: Dry steam, at the given pressure, that has been heated to a temperature higher than the boiling point of water at that pressure.

Referring to the adjacent drawing again, water is converted into wet, dry saturated or superheated steam in three steps:

  • Water at point 1 is heated to its boiling point at the given pressure of point 2 (the dark blue line). At that point the water is then referred to as saturated water. The amount of heat added between points 1 and 2 is called sensible heat.
  • The water is further heated at constant pressure (the red isobar from point 2 to point 3) to form wet steam. When it is completely vaporized (at point 3), it is then dry saturated steam. The amount of heat required to completely vaporize the water is called the heat of vaporization and denoted as Hv or Hvap.
  • The dry saturated steam is yet further heated at constant pressure (the red isobar from point 3 to point 4). The steam is then referred to as superheated steam. The amount of heat added to superheat the dry saturated steam is also called sensible heat.
  • It should be noted that the points 2 and 3 are at the same boiling point temperature and pressure and also that, at those conditions, the liquid and the steam (whether wet or dry) are in equilibrium with each other.

Production

For more information, see: Steam generator.

Ways of producing steam from water include use of boilers or steam generators. Boilers are pressure vessels in which water is heated to produce pressurized steam, for generally heating houses or buildings, for steam engines, or a variety of other uses. Steam generators are devices or units, often including boilers (the definitions coincide greatly), for producing (generating) steam for power plant, industrial, or other uses. The size of steam generators ranges from bench top to very large units or sections of a thermal power plant. In the field of nuclear power plants, the term steam generator refers specifically to a particular very large heat exchanger used to thermally connect the primary (reactor plant) system to a secondary (steam plant) system in a pressurized water reactor (PWR) plant, which generates steam for the steam plant, of course.

Uses

Electricity generation

For more information, see: Conventional coal-fired power plant, Nuclear power plant, and Steam generator.

The worldwide capacity of electrical power generation by conventional coal-fired power plants currently amounts to about 800,000 MW[1][2][3][4] and the worldwide capacity of nuclear power generation amounts to about 370,000 MW.[5][6] That amounts to a total of 1,170,000 MW of worldwide generation, most of which involves the use of superheated steam to drive the turbines that spin the electrical generators (see the adjacent schematic diagram).[7]

Assuming an overall thermal efficiency of 34%, a steam generator (boiler) efficiency of 75 to 85% and an electrical generator efficiency of 98.5%, a conventional coal-fired power plant would use superheated steam at a rate of 3.47 to 3.93 (t/h) per MW of power output. Thus, a 1000 MW power plant would use 3,470 to 3,930 metric tons (tonnes) of steam per hour and the steam used by the 1,170,000 MW of worldwide power generation by coal-fired and nuclear power plants might be as much as 4,000,000 to 4,600,000 metric tons of steam per hour.

The diagrams below schematically depict the equipment used in a conventional fuel-fired steam to electric power plant as well as the temperature-entropy (T-S) diagram of the corresponding Rankine cycle. A nuclear power plant differs only to the extent that the heat required by the boiler is provided by heat derived from a nuclear reactor.

(PD) Diagram: Milton Beychok
(PD) Image: Milton Beychok
Diagram of a power plant coal-fired steam generator
(PD) Diagram: Milton Beychok

Cogeneration of heat and power

Cogeneration is also referred to as combined heat and power or CHP. In electrical power generation, the turbine exhaust steam is typically condensed and returned to the boiler for re-use. However, in one form of cogeneration, all or part of the turbine exhaust steam is distributed through a district heating system to heat buildings rather than being condensed. The world's biggest steam cogeneration system is the district heating system which distributes steam from seven cogeneration plants to provide heating for 100,000 buildings in the city of New York.[8][9]

Steam engines

As an overall definition, a steam engine is an engine that uses steam to perform mechanical work. By that definition, steam turbines are steam engines. However, this section describes steam engines that use the expansion of steam to move a piston that performs work. Such steam engines were the driving force behind the Industrial Revolution of the 18th century and gained widespread commercial use for driving machinery in factories, powering water pumping stations and transport application such as railway locomotives, steamships and road vehicles. The use of tractors driven by steam engines led to an increase in the land available for agricultural cultivation.

Although largely replaced by steam turbines, stationary reciprocating steam engines are still used in industry and elsewhere for driving pumps, gas compressors and other types of machinery.

Uses in industrial process facilities

A great many processes in petroleum refineries, natural gas processing plants, petrochemical plants and other industrial facilities use steam as:

  • A heat source for distillation column reboilers.
  • A heat source injected directly into various distillation columns known as steam strippers and side-cut strippers to provide the required distillation heat.
  • A heat source flowing through tubular coils installed inside storage tanks to heat certain stored liquids.

Other uses

Sterilization
An autoclave, which uses steam under pressure, is used in microbiology laboratories and similar environments for sterilization; autoclaving is also a major method for industrial and home canning of food
Agricultural
In agriculture, steam is used for soil sterilization to avoid the use of harmful chemical agents and increase soil health.
Commercial and domestic uses
Steam's capability to transfer heat is also used in the home as well as commercial facilities for pressure cookers, steam cleaning of fabrics and carpets, steam ironing and for heating of buildings.
Ship propulsion
Steam is sometimes used to power steam turbines to propel naval ships, ice breakers, and other ships; steam turbines are primarily used in nuclear-powered ships, with other new construction using various combinations of gas turbines, diesel engines, and electric motors

Steam tables and Mollier diagrams

For more information, see: Steam tables and Mollier diagrams.

Steam tables provide tabulated thermodynamic data for the liquid and vapor phases of water. The table below is only an example of the type of data provided. In a complete set of steam tables, the table would provide data in temperature increments of 1 °C. The complete steam tables would also provide a similar "Saturated Steam:Pressure Table" in which the first column would have pressure values and the second column would be temperature values. Most steam tables include tabulated thermodynamic data for superheated steam as well.

Saturated Steam:Temperature Table[10]
T
°C		 P
bar		 P
kPa		 ρL
kg/m3		 ρV
kg/m3 		HL
J/g		 HVap
J/g		 HV
J/g		 SL
J/(g·K) 		SVap
J/(g·K)		 SV
J/(g·K)
10 0.012282 1.2282 999.65 0.00941 42.02 2477.2 2519.2 0.15109 8.7487 8.8998
20 0.023393 2.3393 998.19 0.01731 83.91 2453.5 2537.4 0.29648 8.3695 8.6660
30 0.042470 4.2470 995.61 0.03042 125.73 2429.8 2555.5 0.43675 8.0152 8.4520
40 0.073849 7.3849 992.18 0.05124 167.53 2406.0 2573.5 0.57240 7.6831 8.2555
50 0.12352 12.352 988.00 0.08315 209.34 2381.9 2591.3 0.70381 7.3710 8.0748
100 1.0142 101.42 958.35 0.5982 419.17 2256.4 2675.6 1.3072 6.0469 7.3541
150 4.7616 476.16 917.01 2.5481 632.18 2113.7 2745.9 1.8418 4.9953 6.8371
200 15.549 1554.9 864.66 7.8610 852.27 1939.7 2792.0 2.3305 4.0996 6.4302
250 39.762 3976.2 798.89 19.967 1085.8 1715.2 2800.9 2.7935 3.2785 6.0721
300 85.879 8587.9 712.14 46.168 1345.0 1404.6 2749.6 3.2552 2.4507 5.7059
Symbols:

P = absolute pressure   ρL = liquid density   ρV = vapor density
HL = liquid specific enthalpy   HVap = enthalpy of vaporization   HV = vapor specific enthalpy
SL = liquid specific entropy   SVap = entropy of vaporization   SV = vapor specific entropy

Mollier diagrams are graphical representations of the thermodynamic properties of materials involving "Enthalpy" as one of the coordinates. Mollier diagrams are named after Richard Mollier (1863 - 1935), a professor at Dresden University in Germany, who pioneered the graphical display of the relationship of temperature, pressure, enthalpy, entropy and volume of steam (as well as for moist air) that has aided in the teaching of thermodynamics to many generations of engineers. His enthalpy-entropy (H-S) diagram for steam was first published in 1904.[11][12]

Mollier diagrams are routinely used to visualize the working cycles of thermodynamic systems involved with the chemical engineering process design of power plants (fossil or nuclear), gas compressors, steam turbines, refrigeration systems and air conditioning.

A sample Mollier diagram for steam is presented below and others are available online:[13][14][15]

(GNU) Image: Markus Schweiss
Mollier H-S Diagram for Water-Steam

References

  1. ↑ A megawatt (MW) of electrical power is often denoted as MWe to differentiate it from other forms of power.
  2. ↑ International Energy Agency, 2006, Key Energy Statistics (International Energy Agency)
  3. ↑ International Energy Outlook 2008; Highlights (Energy Information Administration, U.S. DOE)
  4. ↑ International Energy Outlook 2008: Chapter 5 (Energy Information Administration, U.S. DOE)
  5. ↑ Energy, Electricity and Nuclear Power Estimates for the Period up to 2030 2009 Edition, International Atomic Energy Agency
  6. ↑ Nuclear Power Plants, Worldwide European Nuclear Society
  7. ↑ The amount would be even larger if power plants using other fuels were included (i.e., fuel oil, natural gas and biomass, wood, etc).
  8. ↑ Steam Carl Bevelhymer, Gotham Gazette, November 10, 2003
  9. ↑ Newsroom: Steam From the website of the Con Edison company in New York.
  10. ↑ NISTIR 5078, Thermodynamic Properties of Water Tabulation from the IAPWS Formulation 1995 for the Thermodynamic Properties of Ordinary Water Substance for General and Scientific Use (1998), Allan H. Harvey, National Institute of Standards and Technology
  11. ↑ Mollier Charts From the website of the ChemicaLogic Corporation
  12. ↑ R. K. Rajput (2009). Engineering Thermodynamics, 3rd Edition. Jones & Bartlett. ISBN 1-934015-14-8.  Google Books Use the search function for "Mollier diagram" and select page 77.
  13. ↑ Mollier diagram of water-steam From the website of Engineering ToolBox
  14. ↑ H-S Diagram for Water Associate Professor Israel Urieli, Department of Mechanical Engineering, Ohio University.
  15. ↑ Mollier Diagram for Water and the excellent animation video at Mollier Diagram for Water
 (Read more...) 		Meg Ireland Milton Beychok; Howard C. Berkowitz 5


Current Winner (to be selected and implemented by an Administrator)

To change, click edit and follow the instructions, or see documentation at {{Featured Article}}.

(PD) Photo: Gretar Ívarsson
Geothermal power plant in Iceland

Steam is the vapor (gaseous) phase of water (H2O) usually generated by the boiling of water. When the steam does not contain any liquid water, it is known as dry steam and it is completely colorless. However, when the steam contains tiny droplets of condensed liquid water, it appears to the eye as a white cloud (see the steam being vented from a geothermal power plant in the adjacent photograph).

What is very often referred to as smoke from cooling towers and other vents in industrial facilities is water vapor which has partially condensed and is mistaken to be white smoke. Water aerosols and mists, such as those created by spray cans for misting house plants or certain types of humidifiers, may also create small visible clouds of water droplets, but aerosols, mists and fogs are not steam. Liquids other than water may also form visible clouds when vaporized, but they are not clouds of steam.

Steam is manufactured in industrial processes by the boiling and vaporization of liquid water. It also occurs naturally by being vented from volcanoes, fumaroles, geysers and other geothermal sources.

Steam has a great many industrial and domestic uses. Probably the most important and by far the largest use of steam is in nuclear, fossil fuel and geothermal power plants.

Types of steam

(CC) Diagram: Milton Beychok

As shown in the adjacent diagram, there are three types of steam:

  • Wet steam: A mixture of water plus steam (liquid plus vapor) at the boiling point temperature of water at a given pressure. Quality of steam refers to the fraction or percentage of gaseous steam in a wet steam mixture.
  • Dry steam: Steam, at the given pressure, that contains no water (also referred to as saturated steam). The steam quality = 100%. At the top of steam generator units for producing saturated steam, there are moisture separators used to remove residual water droplets from outgoing steam.
  • Superheated steam: Dry steam, at the given pressure, that has been heated to a temperature higher than the boiling point of water at that pressure.

Referring to the adjacent drawing again, water is converted into wet, dry saturated or superheated steam in three steps:

  • Water at point 1 is heated to its boiling point at the given pressure of point 2 (the dark blue line). At that point the water is then referred to as saturated water. The amount of heat added between points 1 and 2 is called sensible heat.
  • The water is further heated at constant pressure (the red isobar from point 2 to point 3) to form wet steam. When it is completely vaporized (at point 3), it is then dry saturated steam. The amount of heat required to completely vaporize the water is called the heat of vaporization and denoted as Hv or Hvap.
  • The dry saturated steam is yet further heated at constant pressure (the red isobar from point 3 to point 4). The steam is then referred to as superheated steam. The amount of heat added to superheat the dry saturated steam is also called sensible heat.
  • It should be noted that the points 2 and 3 are at the same boiling point temperature and pressure and also that, at those conditions, the liquid and the steam (whether wet or dry) are in equilibrium with each other.

Production

For more information, see: Steam generator.

Ways of producing steam from water include use of boilers or steam generators. Boilers are pressure vessels in which water is heated to produce pressurized steam, for generally heating houses or buildings, for steam engines, or a variety of other uses. Steam generators are devices or units, often including boilers (the definitions coincide greatly), for producing (generating) steam for power plant, industrial, or other uses. The size of steam generators ranges from bench top to very large units or sections of a thermal power plant. In the field of nuclear power plants, the term steam generator refers specifically to a particular very large heat exchanger used to thermally connect the primary (reactor plant) system to a secondary (steam plant) system in a pressurized water reactor (PWR) plant, which generates steam for the steam plant, of course.

Uses

Electricity generation

For more information, see: Conventional coal-fired power plant, Nuclear power plant, and Steam generator.

The worldwide capacity of electrical power generation by conventional coal-fired power plants currently amounts to about 800,000 MW[1][2][3][4] and the worldwide capacity of nuclear power generation amounts to about 370,000 MW.[5][6] That amounts to a total of 1,170,000 MW of worldwide generation, most of which involves the use of superheated steam to drive the turbines that spin the electrical generators (see the adjacent schematic diagram).[7]

Assuming an overall thermal efficiency of 34%, a steam generator (boiler) efficiency of 75 to 85% and an electrical generator efficiency of 98.5%, a conventional coal-fired power plant would use superheated steam at a rate of 3.47 to 3.93 (t/h) per MW of power output. Thus, a 1000 MW power plant would use 3,470 to 3,930 metric tons (tonnes) of steam per hour and the steam used by the 1,170,000 MW of worldwide power generation by coal-fired and nuclear power plants might be as much as 4,000,000 to 4,600,000 metric tons of steam per hour.

The diagrams below schematically depict the equipment used in a conventional fuel-fired steam to electric power plant as well as the temperature-entropy (T-S) diagram of the corresponding Rankine cycle. A nuclear power plant differs only to the extent that the heat required by the boiler is provided by heat derived from a nuclear reactor.

(PD) Diagram: Milton Beychok
(PD) Image: Milton Beychok
Diagram of a power plant coal-fired steam generator
(PD) Diagram: Milton Beychok

Cogeneration of heat and power

Cogeneration is also referred to as combined heat and power or CHP. In electrical power generation, the turbine exhaust steam is typically condensed and returned to the boiler for re-use. However, in one form of cogeneration, all or part of the turbine exhaust steam is distributed through a district heating system to heat buildings rather than being condensed. The world's biggest steam cogeneration system is the district heating system which distributes steam from seven cogeneration plants to provide heating for 100,000 buildings in the city of New York.[8][9]

Steam engines

As an overall definition, a steam engine is an engine that uses steam to perform mechanical work. By that definition, steam turbines are steam engines. However, this section describes steam engines that use the expansion of steam to move a piston that performs work. Such steam engines were the driving force behind the Industrial Revolution of the 18th century and gained widespread commercial use for driving machinery in factories, powering water pumping stations and transport application such as railway locomotives, steamships and road vehicles. The use of tractors driven by steam engines led to an increase in the land available for agricultural cultivation.

Although largely replaced by steam turbines, stationary reciprocating steam engines are still used in industry and elsewhere for driving pumps, gas compressors and other types of machinery.

Uses in industrial process facilities

A great many processes in petroleum refineries, natural gas processing plants, petrochemical plants and other industrial facilities use steam as:

  • A heat source for distillation column reboilers.
  • A heat source injected directly into various distillation columns known as steam strippers and side-cut strippers to provide the required distillation heat.
  • A heat source flowing through tubular coils installed inside storage tanks to heat certain stored liquids.

Other uses

Sterilization
An autoclave, which uses steam under pressure, is used in microbiology laboratories and similar environments for sterilization; autoclaving is also a major method for industrial and home canning of food
Agricultural
In agriculture, steam is used for soil sterilization to avoid the use of harmful chemical agents and increase soil health.
Commercial and domestic uses
Steam's capability to transfer heat is also used in the home as well as commercial facilities for pressure cookers, steam cleaning of fabrics and carpets, steam ironing and for heating of buildings.
Ship propulsion
Steam is sometimes used to power steam turbines to propel naval ships, ice breakers, and other ships; steam turbines are primarily used in nuclear-powered ships, with other new construction using various combinations of gas turbines, diesel engines, and electric motors

Steam tables and Mollier diagrams

For more information, see: Steam tables and Mollier diagrams.

Steam tables provide tabulated thermodynamic data for the liquid and vapor phases of water. The table below is only an example of the type of data provided. In a complete set of steam tables, the table would provide data in temperature increments of 1 °C. The complete steam tables would also provide a similar "Saturated Steam:Pressure Table" in which the first column would have pressure values and the second column would be temperature values. Most steam tables include tabulated thermodynamic data for superheated steam as well.

Saturated Steam:Temperature Table[10]
T
°C		 P
bar		 P
kPa		 ρL
kg/m3		 ρV
kg/m3 		HL
J/g		 HVap
J/g		 HV
J/g		 SL
J/(g·K) 		SVap
J/(g·K)		 SV
J/(g·K)
10 0.012282 1.2282 999.65 0.00941 42.02 2477.2 2519.2 0.15109 8.7487 8.8998
20 0.023393 2.3393 998.19 0.01731 83.91 2453.5 2537.4 0.29648 8.3695 8.6660
30 0.042470 4.2470 995.61 0.03042 125.73 2429.8 2555.5 0.43675 8.0152 8.4520
40 0.073849 7.3849 992.18 0.05124 167.53 2406.0 2573.5 0.57240 7.6831 8.2555
50 0.12352 12.352 988.00 0.08315 209.34 2381.9 2591.3 0.70381 7.3710 8.0748
100 1.0142 101.42 958.35 0.5982 419.17 2256.4 2675.6 1.3072 6.0469 7.3541
150 4.7616 476.16 917.01 2.5481 632.18 2113.7 2745.9 1.8418 4.9953 6.8371
200 15.549 1554.9 864.66 7.8610 852.27 1939.7 2792.0 2.3305 4.0996 6.4302
250 39.762 3976.2 798.89 19.967 1085.8 1715.2 2800.9 2.7935 3.2785 6.0721
300 85.879 8587.9 712.14 46.168 1345.0 1404.6 2749.6 3.2552 2.4507 5.7059
Symbols:

P = absolute pressure   ρL = liquid density   ρV = vapor density
HL = liquid specific enthalpy   HVap = enthalpy of vaporization   HV = vapor specific enthalpy
SL = liquid specific entropy   SVap = entropy of vaporization   SV = vapor specific entropy

Mollier diagrams are graphical representations of the thermodynamic properties of materials involving "Enthalpy" as one of the coordinates. Mollier diagrams are named after Richard Mollier (1863 - 1935), a professor at Dresden University in Germany, who pioneered the graphical display of the relationship of temperature, pressure, enthalpy, entropy and volume of steam (as well as for moist air) that has aided in the teaching of thermodynamics to many generations of engineers. His enthalpy-entropy (H-S) diagram for steam was first published in 1904.[11][12]

Mollier diagrams are routinely used to visualize the working cycles of thermodynamic systems involved with the chemical engineering process design of power plants (fossil or nuclear), gas compressors, steam turbines, refrigeration systems and air conditioning.

A sample Mollier diagram for steam is presented below and others are available online:[13][14][15]

(GNU) Image: Markus Schweiss
Mollier H-S Diagram for Water-Steam

References

  1. ↑ A megawatt (MW) of electrical power is often denoted as MWe to differentiate it from other forms of power.
  2. ↑ International Energy Agency, 2006, Key Energy Statistics (International Energy Agency)
  3. ↑ International Energy Outlook 2008; Highlights (Energy Information Administration, U.S. DOE)
  4. ↑ International Energy Outlook 2008: Chapter 5 (Energy Information Administration, U.S. DOE)
  5. ↑ Energy, Electricity and Nuclear Power Estimates for the Period up to 2030 2009 Edition, International Atomic Energy Agency
  6. ↑ Nuclear Power Plants, Worldwide European Nuclear Society
  7. ↑ The amount would be even larger if power plants using other fuels were included (i.e., fuel oil, natural gas and biomass, wood, etc).
  8. ↑ Steam Carl Bevelhymer, Gotham Gazette, November 10, 2003
  9. ↑ Newsroom: Steam From the website of the Con Edison company in New York.
  10. ↑ NISTIR 5078, Thermodynamic Properties of Water Tabulation from the IAPWS Formulation 1995 for the Thermodynamic Properties of Ordinary Water Substance for General and Scientific Use (1998), Allan H. Harvey, National Institute of Standards and Technology
  11. ↑ Mollier Charts From the website of the ChemicaLogic Corporation
  12. ↑ R. K. Rajput (2009). Engineering Thermodynamics, 3rd Edition. Jones & Bartlett. ISBN 1-934015-14-8.  Google Books Use the search function for "Mollier diagram" and select page 77.
  13. ↑ Mollier diagram of water-steam From the website of Engineering ToolBox
  14. ↑ H-S Diagram for Water Associate Professor Israel Urieli, Department of Mechanical Engineering, Ohio University.
  15. ↑ Mollier Diagram for Water and the excellent animation video at Mollier Diagram for Water

(Read more...)

Previous Winners

Rules and Procedure

Rules

  • The primary criterion of eligibility for a new draft is that it must have been ranked as a status 1 or 2 (developed or developing), as documented in the History of the article's Metadate template, no more than one month before the date of the next selection (currently every Thursday).
  • Any Citizen may nominate a draft.
  • No Citizen may have nominated more than one article listed under "current nominees" at a time.
  • The article's nominator is indicated simply by the first name in the list of votes (see below).
  • At least for now--while the project is still small--you may nominate and vote for drafts of which you are a main author.
  • An article can be the New Draft of the Week only once. Nominated articles that have won this honor should be removed from the list and added to the list of previous winners.
  • Comments on nominations should be made on the article's talk page.
  • Any draft will be deleted when it is past its "last date eligible". Don't worry if this happens to your article; consider nominating it as the Article of the Week.
  • If an editor believes that a nominee in his or her area of expertise is ineligible (perhaps due to obvious and embarrassing problems) he or she may remove the draft from consideration. The editor must indicate the reasons why he has done so on the nominated article's talk page.

Nomination

See above section "Add New Nominees Here".

Voting

  • To vote, add your name and date in the Supporters column next to an article title, after other supporters for that article, by signing <br />~~~~. (The date is necessary so that we can determine when the last vote was added.) Your vote is alloted a score of 1.
  • Add your name in the Specialist supporters column only if you are an editor who is an expert about the topic in question. Your vote is alloted a score of 1 for articles that you created and 2 for articles that you did not create.
  • You may vote for as many articles as you wish, and each vote counts separately, but you can only nominate one at a time; see above. You could, theoretically, vote for every nominated article on the page, but this would be pointless.

Ranking

  • The list of articles is sorted by number of votes first, then alphabetically.
  • Admins should make sure that the votes are correctly tallied, but anyone may do this. Note that "Specialist Votes" are worth 3 points.

Updating

  • Each Thursday, one of the admins listed below should move the winning article to the Current Winner section of this page, announce the winner on Citizendium-L and update the "previous winning drafts" section accordingly.
  • The winning article will be the article at the top of the list (ie the one with the most votes).
  • In the event of two or more having the same number of votes :
    • The article with the most specialist supporters is used. Should this fail to produce a winner, the article appearing first by English alphabetical order is used.
    • The remaining winning articles are guaranteed this position in the following weeks, again in alphabetical order. No further voting should take place on these, which remain at the top of the table with notices to that effect. Further nominations and voting take place to determine future winning articles for the following weeks.
    • Winning articles may be named New Draft of the Week beyond their last eligible date if their circumstances are so described above.

Administrators

The Administrators of this program are the same as the admins for CZ:Article of the Week.

References

See Also


Citizendium Initiatives
Eduzendium | Featured Article | Recruitment | Subpages | Core Articles | Uncategorized pages |
Requested Articles | Feedback Requests | Wanted Articles

|width=10% align=center style="background:#F5F5F5"|  |}

Retrieved from "https://citizendium.org/wiki/index.php?title=Archive:New_Draft_of_the_Week&oldid=273677"