FC-MSR nuclear reactor

See also: Nuclear_power_reconsidered

© Image: Elysium Industries
Diagram and specifications for the reactor

The FC-MSR is a Molten Salt Reactorusing Fast neutrons and a Chloride salt. Fast Neutron Reactors are capable of burning spent nuclear fuel, old bomb cores, depleted uranium and thorium. This article will address the issues raised in the parent article Nuclear power reconsidered.

Safety

Accidental overheating. Fission stops quickly if the continuous flow of fuel out the bottom of the reactor is not replenished by pumping to the top. Decay heat is absorbed by a massive pool of molten salt around the reactor vessel. Shutdown is quicker and even more reliable than a freeze plug. Pumping will stop if there is a loss of power, overheating, a turbine trip, operator command, or a shutdown signal from any of various sensors in and around the reactor. No operator action is required, and there is nothing an operator can do to stop a safe shutdown. There are no electronic or electrical safety-critical systems or valves. The reactor is "walk-away safe".

Leakage of Radioactivity Add text here.

Sabotage Add text here.

Waste Management

<<This section is copied from ThorCon nuclear reactor. We need equivalent data for the FC-MSR.>>
All reactor maintenance and fuel processing is done at a secure location.

Average per year for a 500MW plant:
High Level Waste: 13,400kg to dry-cask storage
Medium and Low Level Waste: 343 tonnes of irradiated steel (one of the 4 "cans") shipped out for refurbishment.
Recycled Fuel: 650kg of 19.7% U-235 (33% of total U consumption)
Other: (Medical isotopes, etc.)

The "waste" in the ThorCon fuel cycle is actually valuable fuel for future fast neutron reactors capable of efficiently burning thorium and depleted uranium. This will extend proven resources from centuries to millennia.

Weapons Proliferation

Normal reprocessing of spent nuclear fuel from standard water moderated reactors involves separation of fissile material from the waste, and could lead to weapons-grade plutonium. This separation step is not necessary, however, if the spent fuel is to be used in a fast neutron reactor. These reactors can tolerate a much higher level of contaminants in the reprocessed fuel.

Elysium's process for making fresh fuel from spent fuel rods is very simple. The rods are chopped into 2cm chunks and dissolved in a vat of molten chloride salt. The solids are filtered out and the remaining liquid is used as fuel. Plutonium is added to bring the total fissile to the 10% needed for sustained burning. Weapons-grade plutonium, left over from the cold war, is denatured (diluted with reactor-grade plutonium) as it is added to the molten salt. At no point in the further processing or consumption of fuel is there any weapons-grade material.

Cost

<<This section is copied from ThorCon nuclear reactor. We need equivalent data for the FC-MSR.>>
The expected cost of a complete power plant will be less than a coal plant of equal power.[13] Everything in the fission island except the structure itself is replaceable. Every four years the sealed reactor and entire primary loop is changed out, returned to a centralized recycling facility, decontaminated, disassembled, inspected, and refurbished. Incipient problems are caught before they can turn into casualties. Thorcon plants with replaceable sealed reactors can operate for 80 years; but, if a ThorCon is decommissioned, the process is little more than pulling out but not replacing all the replaceable parts.[14]

Specs for a 500MW plant:[15] Plant cost per KW: $1200 Operating cost per KWh: $0.03 (including $0.006 for fuel) Fuel consumption per day: 5.3kg of 19.7% enriched uranium plus 9.0kg of thorium.[16] -145 tonnes of natural uranium per GW-year compared to about 250 tonnes for a standard light water reactor - future re-enrichment of spent fuel will cut this uranium requirement by a third Initial fuel load (2 cans): 78,000kg NaF-BeF2-ThF4-UF4 (76-12-10.2-1.8 mol %)